EXFO MAX-800 Series, User Manual

Page: 128 / 495

Test Setup - Test Configurator, Timer, and System
120
MAX-800 Series
Labels
Labels
From the
Test
menu, tap
Setup
,
Test Configurator
, the interface block,
and on the Labels tab.
Note:
Selecting a Label byte to be generated will automatically update the
corresponding OH byte. Refer to
OH - SONET/SDH on page 343 for more
information.
Labels

STS/AU Path (C2)
: The C2 byte is allocated to indicate the content of
the STS SPE / VC, including the status of the mapped payloads.
Generated
: Select the C2 byte from the list. Selecting a C2 byte value
will automatically update the OH C2 selection and vice versa. Refer to
C2
on page 351 for more information.

PLM-P/UNEQ-P / HP-PLM/HP-UNEQ : Enables the Payload Mismatch
and STS/AU UNEQ monitoring. This setting is coupled with the
configuration of
Traces (SONET/SDH) on page 301.
Expected
: Select the expected C2 byte from the list. Refer to
C2
on
page 351 for more information.

VT/TU Path (V5)
: The V5 byte is allocated to indicate the content of the
VT/TU path, including the status of the mapped payloads.
Generated
: Select the V5 byte from the list. Selecting a V5 byte value
will automatically update the OH V5 selection and vice versa. Refer to
V5 on page 354 for more information.

PLM-V/UNEQ-V / LP-PLM/LP-UNEQ : Enables the Payload Mismatch
and VT/TU UNEQ monitoring. This setting is coupled with the
configuration on the
Labels on page 259.
Expected
: Select the expected V5 byte from the list. Refer to V5 on
page 354 for more information.