EXFO MAX-800 Series, User Manual, Page: 267 / 495

Test Results
MaxTester
259
Labels
Labels
From the
Test
menu, tap
Results
, and
Labels
.
Note:
Selecting a Label byte to be generated will automatically update the
corresponding OH byte. Refer to
OH - SONET/SDH
on page 343 for more
information.
Labels

STS/AU Path (C2) : The C2 byte is allocated to indicate the content of
the STS SPE / VC, including the status of the mapped payloads.
Received : Displays the received C2 byte. Refer to C2 on page 351 for
more information.

PLM-P/UNEQ-P / HP-PLM/HP-UNEQ : Enables the Payload Mismatch
and STS/AU UNEQ monitoring. This setting is coupled with the
configuration of
Labels on page 120.
Expected
: Select the expected C2 byte from the list. Refer to
C2
on
page 351 for more information.

VT/TU Path (V5)
: The V5 byte is allocated to indicate the content of the
VT/TU path, including the status of the mapped payloads.
Received
: Displays the received V5 byte. Refer to V5 on page 354 for
more information.

PLM-V/UNEQ-V / LP-PLM/LP-UNEQ
: Enables the Payload Mismatch
and VT/TU UNEQ monitoring. This setting is coupled with the
configuration of
Labels
on page 120.
Expected : Select the expected V5 byte from the list. Refer to V5 on
page 354 for more information.