EXFO MAX-800 Series, User Manual, Page: 309 / 495

Test Results
MaxTester
301
Traces (SONET/SDH)
Traces (SONET/SDH)
From the
Test
menu, tap
Results
,
Traces
, and the
SONET/SDH
sub-tab.
Note:
Selecting a Trace byte to be generated will automatically update the
corresponding OH byte. Refer to
OH - SONET/SDH
on page 343 for more
information.
Traces

Section/RS (J0) , and STS/AU/TU-3 Path (J1) , and VT/TU Path (J2)
Displays the received J0/J1/J2 value in 16 or 64-bytes format. The
<crc7> represents the CRC-7 for a 16-bytes format. The last two bytes
of a 64-bytes format, <C
R
> and <L
F
>, represent respectively a
carriage return and a line feed.

TIM-S/RS-TIM
,
TIM-P/HP-TIM
,
TIM-V
/
LP-TIM
: Enables the
corresponding Trace Identifier Mismatch for the expected message
defined. These settings are coupled with the Traces configuration from
Traces (SONET/SDH) on page 198.
Copy RX
allows using the received TIM message as the expected one.
TCM Access Point Identifier
Note:
Available when TCM is enabled (refer to page 177).

STS/AU Path (N1) , and VT/TU Path (Z6 or N1 (TU-3))
Displays the received N1/Z6 value.

TC-TIM-P/HPTC-TIM/TC-TIM-V/LPTC-TIM : Enables the corresponding
TCM Access Point Identifier for the expected message defined. These
settings are coupled with the Traces configuration from
Traces
(SONET/SDH)
on page 198.
Copy RX allows using the received TIM message as the expected one.