EXFO MAX-800 Series, User Manual

Page: 285 / 495

Test Results
MaxTester
277
Service Performance
Note: Delay variation measurements smaller than 1 μ s will be discarded, not
used for the sampling process, and < 0.001 is displayed as the minimum
value. For the Current value, Not measurable is displayed when no delay
has been measured in the last second.
Errors
For
Dual Test Set
, errors are reported for both local (
L
) and remote (
R
)
directions. For Dual Port topology, errors are reported for both port
directions.

Frame Loss indicates that a sequence number is missing in the
received frames. The pass/fail verdict when enabled reports only the
verdict when it is fail.
Seconds , Count , and Rate values are reported.

Out-of-Sequence
indicates that the received frame sequence number
is either smaller than the expected frame sequence number or is a
duplicate number. The Out-Of-Sequence will not be considered in the
global verdict.
Seconds , Count , and Rate values are reported.
RX Frame Count
The RX Frame Count indicates the number of frames received matching
the selected service ID. For
Dual Test Set
, the count is reported for both
local ( L ) and remote ( R ) directions. For Dual Port topology, the count is
reported for both port directions.