EXFO MAX-800 Series, User Manual

Page: 393 / 495

Test Control
MaxTester
385
Inject Button
Inject Button
Injects alarms/errors based on settings from the
Inject Button
on page 254.
Laser Button
The Laser button enables or disables the laser for optical interfaces. For
Dual Port
topology, enables or disables the laser for both optical interfaces
(ports). However, when an active copper SFP is used on a port, the laser is
always on for this port.
Note:
For SFP+ power level 2, a delay of up to 90 seconds may be required before
generating/transmitting (TX) the laser signal as defined in the
Specifications for Enhanced Small Form Factor Pluggable Module
(SFF-8431).
Laser Button Border Color Description
Black Laser is off.
Red Laser is on.