EXFO MAX-800 Series, User Manual

Page: 140 / 495

Test Setup - Test Configurator, Timer, and System
132
MAX-800 Series
MAC/IP/UDP

Reliability allows the selection of the reliability level:
Normal
(default) or
High
.

Monetary Cost allows the selection of the monetary cost level:
Normal
(default) or
Low
.

Reserved Bit allows the selection of the reserved bit value:
0
(default) or
1
.
Differentiated Services (available when DS is selected).

DSCP Codepoints
:
000000 (CS0) (default), 001000 (CS1) , 010000 (CS2) ,
011000 (CS3)
,
100000 (CS4)
,
101000 (CS5)
,
110000 (CS6)
,
111000 (CS7) , 001010 (AF11) , 001100 (AF12) , 001110 (AF13) ,
010010 (AF21)
,
010100 (AF22)
,
010110 (AF23)
,
011010 (AF31)
,
011100 (AF32) , 011110 (AF33) , 100010 (AF41) , 100100 (AF42) ,
100110 (AF43)
,
101100 (VOICE-ADMIT)
,
101110 (EF)
,
110011 (51) , 110110 (54) , or User Defined .

User Defined Codes
, available when
User Defined
has been
selected from the DSCP codepoints , allows entering a user
defined code from hexadecimal
00
(default) to
3F
once the
TOS/DS Config pop-up is closed.

ECN
allows the selection of the Explicit Congestion Notification
code: 00 (Not-ECT) (default), 01 (ECT-1) , 10 (ECT 0) , or 11 (CE) .
UDP
Allows the selection of the source and destination UDP port number.

Source Port
is configurable from
0
to
65535
; the default is
49184
.

Destination Port is configurable from 0 to 65535 ; the default is
7 (echo)
.