5/01
4/37
11. Lubricate 1st gear bearing and install the steel
cage bearing into the gear. Place the gear assem-
bly and bearing onto the shaft and into the syn-
chroniser ring.
12. Take the heated reverse gear fixed hub and fit
it over the splines, boss uppermost, onto the main-
shaft.
13. Use a soft drift or suitable flange driver if nec-
essary, to ensure the hub is fully home against the
shoulder.
14. From the range of graded snap rings, carefully
install the thickest one which will fit into the groove
with the minimum free play taking care not to dam-
age the mainshaft bearing surface.
15. Check the gear end float is within the toler-
ances stated in the chart.
16. Lubricate the reverse gear bearing and install
the bearing and reverse gear onto the shaft.
Summary of Contents for Roadranger TRSM4106
