![background image](http://html1.mh-extra.com/html/eaton/roadranger-trsm4106/roadranger-trsm4106_service-manual_2353178040.webp)
16. Remove the outer circlip from the input shaft
bearing.
17. Remove the spacer and bearing thrust washer.
5/01
4/5
12. Rotate the gear selector shaft to the left (verti-
cally mounted) or right (horizontally mounted) so
that the case will not foul the selector block on
removal.
13. On overdrive models, remove the capscrews
retaining the two overdrive fork pivot pins and
remove the pins.
15. Remove the capscrews securing the input shaft
cover and remove the cover.
14. Remove the half case flange capscrews and
nuts. Note the position of the shorter capscrews
threaded into the case.
Summary of Contents for Roadranger TRSM4106
