![background image](http://html1.mh-extra.com/html/eaton/roadranger-trsm4106/roadranger-trsm4106_service-manual_2353178076.webp)
5/01
4/41
35. Assemble the three springs and plungers into
the hub and install the synchroniser sleeve and
rollers as described in sub operation 9.
Selector Shaft Disassembly
1. Place selector assembly on bench with the
selector block to the left. Mark the front of the shaft
and keys to aid reassembly
2. Hold the assembly by the selector block and
withdraw the interlock key from the rear.
3. Remove the selector forks from the shaft.
Note:
Tapered capscrew fitted on opposite side
on horizontal unit.
Selector Shaft Disassembly
Summary of Contents for Roadranger TRSM4106
