5/01
4/43
1. Place selector key into slot on the selector shaft
with the three small lugs to the front.
2. Put the selector block onto the shaft and tighten
the capscrew to 35 to 39 Nm.
Note:
If reusing the screw apply Loctite 270 to the
threads before fitting.
3. Place the forks in their respective positions on
the selector shaft.
4. Support the selector shaft and slide in the inter-
lock key from the rear.
5. On overdrive units the 5th/6th fork is replaced by
a selector. Check the fit of the selector before
assembling the transmission.
Summary of Contents for Roadranger TRSM4106
