5/01
3/3
Remote Control Disassembly
1. Ensure neutral is selected and remove the con-
trol assembly from the transmission.
2. Remove the outer shift lever and rubber boot.
Remove the neutral switch and pin (if fitted).
Note:
The position of the lever is marked on the
shaft. Check before removal.
3. Remove the reverse detent cover and pull out
the spring and plunger.
4. Remove the four separate capscrews and lift off
the end cover.
5. Remove the circlip from the shaft and remove
the spring retainer.
6. Withdraw the booster spring, bias, spring inner
retainer and circlip.
Summary of Contents for Roadranger TRSM4106
