![background image](http://html1.mh-extra.com/html/eaton/roadranger-trsm4106/roadranger-trsm4106_service-manual_2353178011.webp)
5/01
1/5
6.
Main Casing Halves
15 Capscrews with Plain Nuts M10 Thread 51 to 58 Nm (38 to 43 lbs ft). With Plain Washers
under Capscrews and Nuts.
15 Flange headed screws and Nuts M10 Thread 45 to 55 Nm.
7.
Main Casing Halves
3 Capscrews M10 Thread 51 to 58 Nm (38 to 43 lbs ft). Plain Washers.
3 Flange headed screws M10 Thread 30 to 40 Nm.
8.
Remote Control Housing End Cover
4 Capscrews M8 Thread 20 to 24 Nm (15 to 18 lbs ft). Spring Lockwashers.
9.
P.T.O./Reverse Idler Gear Cover
6 Capscrews M10 Thread - 35 to 39 Nm (25 to 29 lbs ft).
10.
Output Shaft
Locknut M33 Thread 490 to 588 Nm (362 to 434 lbs ft). With Nylon Locking Insert.
11.
Remote Control Housing
4/6/8 Capscrews M10 Thread 35 to 39 Nm (25 to 29 lbs ft). Plain Washers and Spring Lockwashers.
12.
Overdrive Selector fork Pivots
2 Capscrews M8 Thread (with lockwashers) 20 to 24 Nm (15 to 18 lbs ft).
General
Torque Tightening Recommedations
Screws and Nuts
1.
Clutch Housing
12 Studs M12 Thread 59 Nm (43 lbs ft) minimum. Installed with Loctite 242.
2.
Clutch Housing
12 Nuts M12 Thread 69 to 78 Nm (51 to 58 lbs ft). With Plain Washers and Spring Lockwashers.
3.
Clutch Housing
12 Capscrews M12 Thread 69 to 78 Nm (51 to 58 lbs ft). With Plain Washers and Spring
ockwashers.
4.
Front P.T.O. Cover
6 Capscrews M10 Thread 35 to 39 Nm (25 to 29 lbs ft).
5.
Selector Block Tapered Lockscrew
1 Lockscrew M10 Thread 35 to 39 Nm (25 to 29 lbs ft). Patchlock or Thread coated with Loctite 270.
Summary of Contents for Roadranger TRSM4106
