![background image](http://html1.mh-extra.com/html/eaton/roadranger-trsm4106/roadranger-trsm4106_service-manual_2353178034.webp)
5/01
3/10
4. Fit the seat ensuring that the slot in the seat
locates onto the pin and into the bore of the hous-
ing.
5. Ensuring that the smaller diameter of the spring
sits against the seat refit the spring and retaining
Circlip.
6. Install the yoke into the housing.
7. Apply a light coating of grease to the bushes in
the end covers. Apply Loctite 5900 to the joint
faces. Fit the end caps, screws and washers.
Torque screws to 20 to 24 Nm.
8. Refit the plunger, spring(s), end cover (apply
Loctite 5900 to the joint faces), screws and wash-
ers. Torque screws to 20 to 24Nm.
9. Refit the plunger, spring, detent cover (apply a
coating of Loctite 5900), screws and washers.
Torque screws to 20 to 24 Nm.
Summary of Contents for Roadranger TRSM4106
