5/01
1/13
Locally Made Tools
The following illustration shows a suitable cradle
which can be used to stand the transmission ’on
end’ during ’Disassembly’ and ’Reassembly’. The
thickness of the block has been calculated to lift
the mainshaft the required distance during removal
and installation of the layshaft. If the height of the
cradle is increasing, the thickness of the block
should be increased by the same amount.
Three Legged Puller - Series 1500 with Hydraulic
Ram
Puller Kit - Series 1500 with Hydraulic Ram
The following general purpose pullers are available from Sykes-Pickavant Ltd., or through their
Dealers.
All dimensions in mm.
Mounting Plates - 2 off.
General
Special Tools (continued)
Summary of Contents for Roadranger TRSM4106
