5/01
4/16
12. Remove the 5th gear needle roller bearing. (On
overdrive transmissions this will be 6th gear).
13. Carefully remove the 4th gear-bearing sleeve
retaining snap ring.
14. Using a suitable press or puller support the
mainshaft assembly underneath 3rd speed gear.
Note: It is imperative that the flange, which is part
of the mainshaft, does not foul the press or puller
legs as this may result in damage to the mainshaft.
Press or pull the 4th speed gear bearing sleeve,
4th speed needle roller bearing, 4th speed gear
assembly, 3rd /4th -speed synchroniser assembly
and 3rd speed gear assembly off. Remove the 3rd
speed gear needle roller bearing from the main-
shaft.
15. Place the assembly on to a suitable work sur-
face, 4th speed gear, uppermost. Remove the
bearing sleeve, needle roller bearing and 4th gear
assembly
16. Dismantle the 3rd /4th -speed synchroniser
assembly as previously described in paragraph
one.
17. Lift off the synchroniser hub and synchroniser
ring.
Summary of Contents for Roadranger TRSM4106
