![background image](http://html1.mh-extra.com/html/eaton/roadranger-trsm4106/roadranger-trsm4106_service-manual_2353178029.webp)
5/01
3/5
4. Install the shaft from the right hand side of the
housing.
7. Insert the springs and outer retainer.
Note:
right hand drive units use a large
retainer: left hand drive units use one large (outer)
and one small (inner).
5. Align the inner lever on the shaft and install a
new grooved pin.
Note:
Inner lever should be supported whilst driv-
ing pin to prevent damage to bushes.
8. Fit the outer circlip onto the shaft.
6. Fit the inner circlip onto the shaft. Install the
smaller spring retainer.
9. Fit a new gasket and secure the end cover to
the housing. Tighten to correct torque (20 to 24
Nm).
Note:
The word Top has been cast into the cover
to identify correct positioning.
Summary of Contents for Roadranger TRSM4106
