![background image](http://html1.mh-extra.com/html/black-box/ts029a-r4/ts029a-r4_specifications_2760928001.webp)
1
Combines functions
of seven test sets.
Perform verification
for 10/100/1000BASE-T
switches and PCs.
Match your switch
and PC (or two
switches)—simulate
straight-through or
crossover cable.
Locate cables or
switch ports using the
remote probe to detect
a tone generated by
the handheld tester.
Verifies terminated
pairs in switch or PC,
wired pairs, and pair
reversals.
T
his tool is a necessity for
anyone involved with
10/100/1000BASE-T LAN
installations or repairs.
Use the tester to help you
locate faulty switches, cables,
PCs, or cable connections that
are hindering your LAN’s
performance.
This handy tester helps you
answer these questions about
LAN devices:
• Is my switch or PC powered
on and working?
• Do I need a straight-through
or crossover cable?
• Is my LAN speed 10, 100, or
1000 Mbps?
• Is a switch or PC operating
at less than optimal speed?
• Does my switch or PC
appear as a switch or PC?
The TVR 10/100/1000 Tester
also answers your LAN cabling
questions:
Test, verify, and repair
your 10/100/1000BASE-T LAN
with this low-cost handheld tester.
Key Features
TVR 10/100/1000 TESTER
• Is a switch or PC connected
to my cable?
• Does my switch or PC
require two- or four-pair
cables?
• What pairs are terminated in
my cable?
• Where is my cable in the
wiring closet?
• Which switch port is my PC
using?
• Is my cabling straight-
through or crossover?
• Does my cable have an
inverted pair or other faults?
The TVR 10/100/1000 Tester
can also be used when
documenting legacy LANs and
adding LAN equipment.
To get your LAN up and
running quickly, the TVR
10/100/1000 Tester combines the
features of seven types of test
sets:
• Switch/PC verifier that
indicates the type of device.
• LAN speedometer to verify
the speed of the link.
• Straight-through/crossover
cable simulator for
determining the type of
patch cable required.
• On-line network activity
monitor, which indicates
when data is being
transmitted and at what
speed.
• Tone probe/tone generator
for tracing cable locations
and the ports they use.
• Cable pairs tester, which
verifies what cable pairs are
wired and identifies straight-
through and crossover
configurations.
• Cable termination tester, to
determine whether a LAN
device is connected at the
end of a cable and the
number of cable pairs
required by the device.
Black Box Corporation
• 1000 Park Drive • Lawrence, PA 15055-1018 • Tech Support: 724-746-5500 •
www.blackbox.com
•
e-mail: [email protected]
© 2005. All rights reserved.
Black Box Corporation.
6/1/2005
#22361