Eaton Rapid Link RAMO5, Manual

Page: 26 / 218

1 Rapid Link system 5
1.5 UL Standards Compliance
22
Rapid Link 5 · RAMO5 · RASP5 10/19 MN034004EN www.eaton.com
1.5 UL Standards Compliance
1.5.1 RAMO5
The RAMO5 motor starters have been tested in accordance with
UL 60947-4-2 and are approved as “listed”.
Table 3: RAMO5
Table 4: Short circuit current rating for individual and group protection
The RAMO5 motor starter may be installed and operated observing following
conditions: The device is suitable for use on a circuit capable of delivering not
more than 65000 rms Symmetrical Amperes, 480 V:
• When protected by 30 A fuses; or
• when protected by a circuit breaker having an interrupting rating not less
than 65,000 rms Symmetrical Amperes, 480 Volts,32 A maximum.
Use with drives with flexible cables is subject to AHJ. Installation may be
limited to NFPA 79 applications.
Property Value
Input voltage 480 V AC
Output voltage 480 V AC
Rated operating voltage for brake control 180 V DC / 230/480 V AC / 400/480 V AC
Input current 6,6 A
Output current 6,6 A
Phases 3
Frequency 50/60 Hz
Control voltage, external 24 V DC
Field bus input voltage 30 V DC
Motor protection integrated
Thermistor monitoring integrated
SCCR ￫ Table 4
Degree of protection IP65/NEMA 12
Ambient temperature, maximum 55
°
C
With fuse (UL listed) Circuit-breakers (UL listed)
with built-in
local discon-
nect switch without built-
in local
disconnect
switch with built-in
local discon-
nect switch without built-
in local
disconnect
switch
Voltage 480 V AC 480 V AC 480 V AC 480 V AC
Short-circuit current,
maximum 30 A 30 A 32 A 32 A
Interrupting Rating 10 kA 65 kA 10 kA 10 kA
￫
Devices with an integrated disconnect switch are approved for
use as “motor disconnects” (“lockout/tagout”).