Eaton Rapid Link RAMO5, Manual

Page: 104 / 218

3 Installation
3.6 Motor feeder
100
Rapid Link 5 · RAMO5 · RASP5 10/19 MN034004EN www.eaton.com
3.6.2.1 Motor cable monitoring
Pin 5 and pin 8 of the motor feeder socket are used to monitor the motor
cable’s motor feeder plug and for thermistor protection.
Monitoring is performed depending on the setting in parameter P2-27.
Figure 63: General motor connection with motor feeder plug and motor cable monitoring
3.6.2.2 Motor cable with thermistor connection
Figure 64: General motor connection with thermistor,
motor feeder plug and motor cable monitoring
The cable ends (Pin 5 and Pin 8) on motors with thermistors or thermostats
(thermoclick) must be connected in the terminal box of the motor (T1 - T2).
￫
For motor cable monitoring and operation without a thermistor,
the cable ends of PIN 5 and PIN 8 must be bridged in the termi-
nal box of the motor (cable monitoring T1 - T2).
1 7 3 PE
M
3 ~
U V W PE

≦ 20 m
(≦ 65.62 ft)
5 8 1 7 3 PE
T1 T2
M 3 ∼
ϑ
U V W PE
