Eaton Rapid Link RAMO5, Manual

Page: 189 / 218

10 Parameter list
10.4 Parameter groups for RASP
Rapid Link 5 · RAMO5 · RASP5 10/19 MN034004EN www.eaton.com
185
P5-08 NETReceivePZD4 Configuration of the 4th process data word PDI-4 from the
network master to the drive during cyclic communication.
0: reserved
1: User defined ramp times with 2 decimal places
2: User register 3. Configuration with Function Block Editor.
3: User register 4. Configuration with Function Block Editor. – 0 3 0
P5-09 PointerToParameter Pointer to an internal variable
P5-09 defines the internal variable (or the parameter),
whose value is displayed with P0-59. In addition the value
can be transferred to a fieldbus master via Process Data
Word 3 (PZD3, to be set with P5-05) or 4 (PZD4, to be set
with P5-06). P5-09 is monstly used in conjunction with the
Function Block Editor. – 0 200 0
P5-10 Disable QuickStop 0: Quick stop via sensors deactivated
1: Quick stop via sensors activated; DQ3 signal active – 0 1 0
Para-
meter Designation Description Unit Min Max DS