3 Installation
3.1 Introduction
Rapid Link 5 · RAMO5 · RASP5
10/19 MN034004EN
www.eaton.com
75
3 Installation
3.1 Introduction
This chapter describes the mounting and electrical connection of Rapid Link
modules RAMO5 and RASP5.
3.2 Installation instructions
The mounting instructions in this manual apply to RAMO5 and RASP5 with
standard equipment and IP65 degree of protection.
For installation instructions, see instructional leaflet IL034084ZU for RAMO5
or IL034084ZU for RASP5
3.2.1 Installation site
Rapid Link modules RAMO5 and RASP5 are preferably installed vertically.
→
During installation and mounting, cover the operator control and
display elements and the plug connectors in the control and
power sections, either with a cover or with masking tape, in
order to prevent foreign bodies from entering them.
On RASP5 it is also advisable to protect the cooling fins and,
if fitted, the fan from ingress of foreign bodies.
→
Perform all installation work with the specified tools and without
the use of excessive force.
Figure 37: RAMO5 mounting position
maximum inclination in all direc-
tions: 90°
Do not rotate 180°!
Figure 38: Mounting position of RASP5
Do not rotate by 180°!
F
90°
F
90°
F
90°
F
90°
F
30°
F
30°
F
30°
F
30°
Summary of Contents for Rapid Link RAMO5
