Eaton Rapid Link RAMO5, Manual

Page: 169 / 218

10 Parameter list
10.3 Parameter groups for RAMO
Rapid Link 5 · RAMO5 · RASP5 10/19 MN034004EN www.eaton.com
165
10.3.2 Parameter group 1 (“Basic”)
Table 28: Parameter group 1 (“Basic”)
Para-
meter Designation Description Unit Min Max DS
P1-08 Motor Nom Current Motor rated current.
By setting the ”Motor Nom Current” in the drive, the motor
overload protection is configured to match the motor
rating.
When the measured motor current exceeds “Motor Nom
Current”, the decimal points on the display will flash to
indicate an overload condition.
If this condition persists, the drive will eventually trip,
displaying
I.t-trP
, preventing thermal overload of the
motor.
Amps 0.3 6.6 6.6
P1-13 DI Config Select Configuration of digital inputs with a fix set of combina-
tions – 1 4 1
P1-14 Access Key Entry of the password to get access to the extended
parameter set.
The value to be put in is determined by the level to be
accessed.
Level 2 (Access to parameter groups 0 to 8): P1-14 = P2-32
(Default: 101) – 0 65535 0