![background image](http://html1.mh-extra.com/html/ducati/sporttouring-2/sporttouring-2_owners-manual_2537745098.webp)
98
SOSPENSIONI
Posteriore
Ad azionamento progressivo ottenuto con
l’interposizione di un bilancere tra telaio e fulcro
superiore dell’ammortizzatore. L’ammortizzatore
a serbatoio separato, regolabile in estensione, in
compressione e nel precarico della molla, è
infulcrato nella parte inferiore ad un forcellone
oscillante in acciaio. Il forcellone ruota intorno al
perno fulcro passante per il motore. Questo
sistema conferisce al mezzo eccezionali doti di
stabilità.
Marca e tipo:
SHOWA GD082
Corsa:
65 mm
Escursione ruota posteriore:
148 mm
Anteriore
A forcella oleodinamica a steli rovesciati dotata di
sistema di regolazione esterna del freno idraulico
in estensione e compressione e del precarico
delle molle interne agli steli.
Marca e tipo:
SHOWA GD081
Diametro tubi portanti:
43 mm
Corsa sull’asse steli:
130 mm
SUSPENSIONS
Rear suspension
Of the progressive type, thanks to a linkage
connecting frame and upper pivot point of the
shock absorber. Equipped with a separate
reservoir, the shock absorber enables the
adjustment of rebound and compression
damping and spring preload. At the bottom pivot
point it is connected to a steel swingarm. The
swingarm hinges on a pivot pin passing through
the engine. The whole system gives the bike
excellent stability.
Make and type:
SHOWA GD082
Travel:
65 mm/2.56 in.
Rear wheel travel:
148 mm/5.82 in.
Front suspension
Hydraulic upside-down fork with outer adjuster
for rebound, compression, and preload (for inner
springs of fork legs).
Make and type:
SHOWA GD081
Stanchion diameter:
43 mm/1.69 in.
Travel along leg axis:
130 mm/5.12 in.
SUSPENSIONS
Arrière
A commande progressive obtenue par
l’interposition d’un balancier entre cadre et pivot
supérieur de l’amortisseur. L’amortisseur, à
réservoir séparé, réglable en extension, en
compression et dans la précharge du ressort, est
fixé par sa partie inférieure sur le bras oscillant
en acier. Le bras oscillant tourne autour de l’axe
pivot qui passe par le moteur. Cette solution
technologique procure au système une stabilité
exceptionnelle.
Marque et type:
SHOWA GD082
Débattement:
65 mm
Débattement roue arrière:
148 mm
Avant
Fourche hydraulique inversée, avec réglage
externe de l'action amortissante en
compression/détente, ainsi que de la precharge
des ressorts intérieurs.
Marque et type:
SHOWA GD081
Diamètre tubes porteurs:
43 mm
Débattement sur l’axe tubes de fourche:
130 mm
3B_ST2.PM6
27-10-2009, 10:20
98
Summary of Contents for SportTouring 2
