![background image](http://html1.mh-extra.com/html/ducati/sporttouring-2/sporttouring-2_owners-manual_2537745170.webp)
170
Semicarenature superiori
e inferiori accoppiate
Procedete allo smontaggio delle coperture
laterali del cruscotto e del cupolino come
precedentemente descritto; quindi:
Svitate la vite di fissaggio di ogni semicarenatura
al telaietto laterale, sul lato sinistro, o al serbatoio
espansione, lato destro (fig. 29.1) e quella
posteriore di fissaggio alla staffa del telaio.
Svitate la vite di fissaggio anteriore di ogni
semicarena al deflettore anteriore (fig. 29.2).
Svitate la vite di fissaggio posteriore di ogni
semicarena al telaio (fig. 29.2).
Svitate le 2 viti inferiori che fissano le
semicarene al convogliatore aria centrale (fig.
29.2).
Svitare una delle due viti che fissano le
semicarene tra loro.
Rimuovete le semicarene.
Removing the upper and lower
body panels together
Remove the side guards of the instrument panel
and the headlamp fairing as described above,
then:
Unscrew the fastening screw that holds each
body panel to the side frame on the left side and
to the expansion reservoir on the right side (fig.
29.1) and the rear screw that holds each of them
to the frame bracket.
Unscrew the front fastening screw holding each
body panel to the front baffle (fig. 29.2).
Unscrew the rear fastening screw holding each
body panel to the frame (fig. 29.2).
Unscrew the 2 lower fastening screws holding
the body panels to the front air conveyor (fig.
29.2).
Unscrew one of the two fastening screws of the
body panels.
Remove the body panels.
Demi-carénages supérieurs
et inférieurs accouplés
Déposez les caches latéraux du tableau de bord
et de la bulle, ainsi qu’il est décrit plus haut,
après quoi:
Desserrer la vis fixant chaque demi-carénage au
soutien latéral, côté gauche, ou au réservoir
d’expansion, côté droit (fig. 29.1) et la vis arrière
de fixation à la bride du cadre.
Desserrez la vis de fixation avant de chaque
demi-carène au déflecteur avant (fig. 29.2).
Desserrez la vis de serrage arrière de chaque
demi-carène au cadre (fig. 29.2).
Desserrez les 2 vis inférieur de fixation de demi-
carène au déflecteur d’air central (fig. 29.2).
Desserrer l’une d’entre les deux vis fixant une
demicarène à l’autre.
Retirez les demi-carènes.
6A_ST2.PM6
27-10-2009, 10:21
170
Summary of Contents for SportTouring 2
