Page
1
of
9
BRG0013
R&G Racing
Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
Email:
Fitting Instructions for BRG0013 Radiator Guard
BMW R1250GS 2018
Please note that in cases where kits are packed with rubber washers holding the components onto the bolt –
the rubber washers
should be thrown away
!
THE PARTS SHOWN MAY BE REPRESENTATIVE ONLY (FOR CLARITY OF INSTRUCTIONS ONLY)
Digital copies of these instructions are available to download from
This kit contains:
2x Radiator Guard (BRG0013 Left & Right)
2x 100mm Lengths of self-adhesive Foam
2 x R&G Bubble Sticker
GENERAL TORQUE SETTINGS
M4 BOLT = 8Nm
M5 BOLT = 12Nm
M6 BOLT = 15Nm
M8 BOLT = 20Nm
M10 BOLT = 40Nm
TOOLS REQUIRED
T20 Torx bit
Scissors
