Digitus DN-80233, User Manual

Page: 53 / 379

52
Line Config Mode
This mode allows the operator to configure the console interface. The operator may configure the
interface from the directly connected console or the virtual terminal used with Telnet. The
command prompt at this level is:
Command Prompt: $(Line)#
Policy Map Mode
Use the policy-map <policy-name>command to access the QoS policy map configuration
mode to configure the QoS policy map.
$(Config)# policy map <policy name> Command
Prompt: $(Config-policy-map)#
Policy Class Mode
Use the class <class-name> command to access the QoS policy-classmap mode to attach/
remove a diffserv class to a policy and to configure the QoS policy class.
$(Config policy-map)# class <class name> Command
Prompt: $(Config-policy-classmap)#
Class Map Mode:
This mode consists of class creation/deletion and matching commands. The class match com-
mands specify Layer 2, Layer 3 and general match criteria. Use the class-map class-map-name
commands to access the QoS class map configuration mode to configure QoS class maps.
$(Config)# class-map <class-map-name> Command
Prompt: $(Config class-map)#
Router OSPF Config Mode:
In this mode, the operator is allowed to access the router OSPF configuration commands. The
command prompt at this level is:
$(Config)# router ospf Command Prompt:
$(Config router)#
Router RIP Config Mode:
In this mode, the operator is allowed to access the router RIP configuration commands. The
command prompt at this level is:
$(Config)# router rip Command Prompt:
$(Config router)#
Router BGP Config Mode:
In this mode, the operator is allowed to access the router BGP4 configuration commands. The
command prompt at this level is:
$(Config)# router bgp <1-65535> Command