manualshive.com logo in svg

Digitus DN-80233, User Manual

Share
Download
Digitus DN-80233 User Manual Download Page 190

 

189

Format   

no dot1x max-req 

 

Mode    

Interface Config

 

 

8.2.8 dot1x port-control   

 

This command sets the authentication mode to be used on the specified port. . The control mode 
may be one of the following.   

force-unauthorize: 

The authenticator PAE unconditionally sets the controlled port to unauthorized.   

force-authorized: 

The authenticator PAE unconditionally sets the controlled port to authorized.   

auto: 

The authenticator PAE sets the controlled port mode to reflect the outcome of the 

authentication exchanges between the supplicant, authenticator and the authentication server. 

Default

   

auto  

Format 

   

dot1x port-control {force-unauthorized |    force-authorized | auto}   

Mode 

  

Interface 

Config 

 

 

8.2.8.1 no dot1x port-control 

 

This command sets the authentication mode to be used on the specified port to 'auto'.   

Format   

no dot1x port-control   

Mode    

Interface Config 

 

8.2.9 dot1x port-control All   

 

This command sets the authentication mode to be used on all ports. The control mode may be one 
of the following.   

force-unauthorized: 

The authenticator PAE unconditionally sets the controlled port to 

unauthorized.  

force-authorized: 

The authenticator PAE unconditionally sets the controlled port to authorized.   

auto: 

The authenticator PAE sets the controlled port mode to reflect the outcome of the 

authentication exchanges between the supplicant, authenticator and the authentication server.   

Default  

auto

 

 

Format  

dot1x port-control all {force-unauthorized | force-authorized | auto}   

Mode  

Global Config

   

 

8.2.9.1 no dot1x port-control All 

 

This command sets the authentication mode to be used on all ports to 'auto'.   

Format   

no dot1x port-control all 

 

Mode    

Global Config   

Summary of Contents for DN-80233




























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands