Digitus DN-80233, User Manual

Page: 124 / 379

123
7.12 User Account Commands
These commands manage user accounts. The commands are divided into two functional groups:
„ Show commands display switch settings, statistics, and other information.
„ Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration setting.
7.12.1 disconnect
This command closes a telnet session.
Format
disconnect {
<sessionID> | all}
Mode
Privileged EXEC
7.12.2 show loginsession
This command displays current telnet and serial port connections to the switch.
Format
show loginsession
Mode
Privileged EXEC
ID
Login Session ID
User Name
The name the user will use to login using the serial port or Telnet. A new user may
be added to the switch by entering a name in a blank entry. The user name may be up to 8
characters, and is not case sensitive. Two users are included as the factory default, ‘admin’ and
‘guest’.
Connection From
IP address of the telnet client machine or EIA-232 for the serial port
connection.
Idle Time
Time this session has been idle.
Session Time
Total time this session has been connected.
7.12.3 show users
This command displays the configured user names and their settings. This command is only
available for users with Read/Write privileges.
The SNMPv3 fields will only be displayed if SNMP is
available on the system.
Format
show users
Mode
Privileged EXEC