manualshive.com logo in svg

Digitus DN-80233, User Manual

Share
Download
Digitus DN-80233 User Manual Download Page 160

 

159

This command disables Link Aggregation Control Protocol (LACP) on all ports.   

Format  

no port lacpmode all 

Mode  

Global Config 

 

7.21.3 port-channel   

 

This command configures a new port-channel (LAG) and generates a logical unit/slot/port number 
for the port-channel. The <name> field is a character string which allows the dash '-' character as 
well as alphanumeric characters. Display this number using the “show port-channel”.   

Note:

Before including a port in a port-channel, set the port physical mode. See ‘speed’ 

command.  

Format  

port-channel <name> 

Mode  

Global Config 

 

7.21.3.1 no port-channel 

 

This command deletes a port-channel (LAG).   

Format  

no port-channel {<logical unit/slot/port> | all}   

Mode

  Global Config  

 

7.21.4 port-channel adminmode all   

 

This command enables a port-channel (LAG). The interface is a logical unit/slot/port for a 
configured port-channel. The option 

all 

sets every configured port-channel with the same 

administrative mode setting.   

Format  

port-channel adminmode all 

Mode  

Global Config 

 

7.21.4.1 no port-channel adminmode 

 

This command disables a port-channel (LAG). The interface is a logical unit/slot/port for a 
configured port-channel. The option 

all 

sets

 every configured port-channel with the same 

administrative mode setting.   

Format  

no port-channel adminmode all 

Mode  

Global Config 

 

7.21.5 port-channel linktrap   

 

This command enables link trap notifications for the port-channel (LAG). The interface is a logical 
unit/ slot/port for a configured port-channel. The option 

all 

sets every configured port-channel with 

Summary of Contents for DN-80233




























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands