Digitus DN-80233, User Manual

Page: 239 / 379

238
The following information is repeated for each user priority.
IP Precedence
The IP Precedence value.
Traffic Class
The traffic class internal queue identifier to which the IP Precedence value is
mapped.
9.8.11 show classofservice trust
This command displays the current trust mode setting for a specific interface. The unit/slot/port
parameter is optional and is only valid on platforms that support independent per-port class of
service mappings. If specified, the port trust mode of the interface is displayed. If omitted, the
most recent global configuration settings are displayed.
Format
show classofservice trust [unit/slot/port]
Mode
Privileged EXEC
Non-IP Traffic Class
The traffic class used for non-IP traffic. This is only displayed when the
COS trust mode is set to either 'trust ip-dscp' or 'trust ip-precedence'.
Untrusted Traffic Class
The traffic class used for all untrusted traffic. This is only displayed
when the COS trust mode is set to 'untrusted'.
9.8.12 show interfaces cos-queue
This command displays the class-of-service queue configuration for the specified interface. The
unit/ slot/port parameter is optional and is only valid on platforms that support independent per-port
class of service mappings. If specified, the class-of-service queue configuration of the interface is
displayed. If omitted, the most recent global configuration settings are displayed.
Format
show interfaces cos-queue [unit/slot/port]
Mode
Privileged EXEC
Interface
This displays the unit/slot/port of the interface. If displaying the global configuration, this
output line is replaced with a Global Config indication.
Intf Shaping Rate
The maximum transmission bandwidth limit for the interface as a whole. It
is independent of any per-queue maximum bandwidth value(s) in effect for the interface. This is a
configured value.
Queue Mgmt Type
The queue depth management technique used for all queues on this
interface, either tail drop or weighted random early discard (WRED). This is only displayed if the
platform does not support per-queue configuration of the queue management type. This is a
configured value.
WRED Decay Exponent
The weighted random early discard (WRED) average queue length
calculation decay exponent. This is a configured value.
The following information is repeated for each queue on the interface.
Queue Id An interface supports n queues numbered 0 to (n-1). The specific n value is
platform dependent.
Minimum Bandwidth
The minimum transmission bandwidth guarantee for the queue,
expressed as a percentage. A value of 0 means bandwidth is not guaranteed and the queue