Digitus DN-80233, User Manual

Page: 75 / 379

74
Character Size
The number of bits in a character. The number of bits is always 8.
Flow Control
Whether Hardware Flow-Control is enabled or disabled. Hardware Flow Control is
always disabled.
Stop Bits
The number of Stop bits per character. The number of Stop bits is always 1.
Parity Type
The Parity Method used on the Serial Port. The Parity Method is always None.
7.2.23 single_ip_mgmt enable (only for Layer 2 Series)
This command enables the single IP management function. It allows the network administrator to
configure multiple switch using the same IP address, while use the group-id and switch-id to identify
for each of them.
Format
single_ip_mgmt enable
Mode
Privileged EXEC
7.2.24 single_ip_mgmt groupid (only for Layer 2 Series)
This command sets the group ID for single IP management function.
Format
single_ip_mgmt groupid <1-250>
Mode
Privileged EXEC
7.2.25 single_ip_mgmt mastered (only for Layer 2 Series)
This command sets the master ID for single IP management function.
Format
single_ip_mgmt master <1-250>
Mode
Privileged EXEC
7.2.26 single_ip_mgmt network_parms (only for Layer 2 Series)
This command sets the network parameters for single IP management function.
Format
single_ip_mgmt network_parms <ipaddr> <netmask> [<gateway>]
Mode
Privileged EXEC
7.2.27 single_ip_mgmt switched (only for Layer 2 Series)
This command sets the swith id for single IP management function.
Format
single_ip_mgmt switchid
Mode
Privileged EXEC