Digitus DN-80233, User Manual

Page: 256 / 379

255
11.2.6 ip route distance
This command sets the default distance for static routes. Lower route preference values are
preferred when determining the best route. The "ip route" and "ip route default" commands allow
you to optionally set the distance of an individual static route. The default distance is used when no
distance is specified in these commands. Changing the default distance does not update the
distance of existing static routes, even if they were assigned the original default distance. The new
default distance will only be applied to static routes created after invoking the "ip route distance"
command.
Default 1
Format
ip route distance <
1-255>
Mode
Global Config
11.2.6.1 no ip route distance
This command sets the default static route preference value in the router. Lower route preference
values are preferred when determining the best route.
Format no ip route distance
Mode Global Config
11.2.7 ip forwarding
This command enables forwarding of IP frames.
Default enabled
Format ip forwarding
Mode Global Config
11.2.7.1 no ip forwarding
This command disables forwarding of IP frames.
Format no ip forwarding
Mode Global Config
11.2.8 ip netdirbcast
This command enables the forwarding of network-directed broadcasts. When enabled, network
directed broadcasts are forwarded. When disabled they are dropped.
Default
disabled
Format
ip netdirbcast
Mode Interface Config
11.2.8.1 no ip netdirbcast