manualshive.com logo in svg

Digitus DN-80233, User Manual

Share
Download
Digitus DN-80233 User Manual Download Page 104

 

103

Default  

1 

Format  

vlan pvid <1-4094

> 

Mode 

 Interface Config 

 

7.6.19.1 no vlan pvid 

 

This command sets the VLAN ID per interface to 1.   

Format  

no vlan pvid 

Mode  

Interface Config 

 

7.6.20 vlan tagging   

 

This command configures the tagging behavior for a specific interface in a VLAN to enabled. If 
tagging is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is 
transmitted as untagged frames. The ID is a valid VLAN identification number.   

Format  

vlan tagging <1-4094

> 

Mode  

Interface Config 

 

7.6.20.1 no vlan tagging 

 

This command configures the tagging behavior for a specific interface in a VLAN to disabled. If 
tagging is disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN 
identification number.   

Format  

no vlan tagging <

1-4094> 

Mode  

Interface Config 

 

7.6.21 show vlan   

 

This command displays detailed information, including interface information, for a specific VLAN. 
The ID is a valid VLAN identification number   

Format  

show vlan 

<vlanid> 

 

Modes   

Privileged EXEC 

User EXEC 

VLAN ID   

There is a VLAN Identifier (VID) associated with each VLAN. The range of the 

VLAN ID is 1 to 4094.   

VLAN Name   

A string associated with this VLAN as a convenience. It can be up to 32 

alphanumeric characters long, including blanks. The default is blank. VLAN ID 1 always has a 
name of `Default`. This field is optional.   

Summary of Contents for DN-80233




























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands