manualshive.com logo in svg

Digitus DN-80233, User Manual

Share
Download
Digitus DN-80233 User Manual Download Page 76

 

75

7.2.28 show single_ip_mgmt (only for Layer 2 Series) 

 

This command displays the single ip management configuration information. This function allows 
you to use the same IP to configure multiple switches, while identify the different devices with the 
configurable group ID and switch ID. 
 

Format  

show single_ip_mgmt 

Mode  

Privileged EXEC 

 

Single Ip Management      

Enable/Disable this function.

 

Single Ip Mgmt Group Id     

  The group ID of the switch. 

Single Ip Mgmt Switch Id       

The ID of the switch.

 

Single Ip Mgmt Ip Address     

The IP of the switch.

 

Single Ip Mgmt Networkmask   

The network mask of the switch.

 

Single Ip Mgmt Gateway             

The default gateway of the switch.

 

 
Single Ip Mgmt Group Members   

List the member of the group.

   

This switch is a master switch   

Describe if the switch is a master or not.

   

Client Switch Id(s)   

Describe the Client Switch IDs.

 

Summary of Contents for DN-80233




























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands