Digitus DN-80233, User Manual

Page: 226 / 379

225
Mode Policy-Class-Map Config
Incompatibilities
Drop
9.5.4 conform-color
This command is used to enable color-aware traffic policing and define the conform-color and
exceed-color class maps used. Used in conjunction with the police command where the fields for
the conform level (for simple, single-rate, and two-rate policing) and optionally the exceed level (for
single-rate and two-rate policing) are specified. The <
class-map-name
> parameter is the name of
an existing Diffserv class map, where different ones must be used for the conform and exceed
colors.
Note:
This command may only be used after specifying a police command for the
policy-class instance.
Format
conform-color <class-map-name> [exceed-color <class-map-name>]
Mode
Policy-Class-Map Confi
g
9.5.5 class
This command creates an instance of a class definition within the specified policy for the purpose
of defining treatment of the traffic class through subsequent policy attribute statements. The
<
classname>
is the name of an existing DiffServ class.
Note:
This command causes the specified policy to create a reference to the class definition.
Note:
The CLI mode is changed to Policy-classmap Config when this command is
successfully executed.
Format class <classname>
Mode Policy-Map Config
9.5.5.1 no class
This command deletes the instance of a particular class and its defined treatment from the
specified policy. <
classname>
is the names of an existing DiffServ class.
Note:
This command removes the reference to the class definition for the specified policy.
Format no class <classname>
Mode Policy-Map Config
9.5.6 mark cos
This command marks all packets for the associated traffic stream with the specified class of
servicevalue in the priority field of the 802.1p header (the only tag in a single tagged packet or the
first or outer 802.1Q tag of a double VLAN tagged packet). If the packet does not already contain
this header, one is inserted. The CoS value is an integer from 0 to 7.