Digitus DN-80233 User Manual Download Page 128

Page: 128 / 379

127

7.13 Simple Network Time Protocol (SNTP)
Commands

This section provides a detailed explanation of the SNTP commands. The commands are divided
into two functional groups:

Show commands display spanning tree settings, statistics, and other information.

Configuration Commands configure features and options of the switch. For every

configuration command there is a show command that displays the configuration setting.

7.13.1 sntp broadcast client poll-interval

This command will set the poll interval for SNTP broadcast clients in seconds as a power of two
where <poll-interval> can be a value from 6 to 16.

Default

Format

sntp broadcast client poll-interval <poll-interval>

Mode

Global Config

7.13.1.1 no sntp broadcast client poll-interval

This command will reset the poll interval for SNTP broadcast client back to its default value.

Format

no sntp broadcast client poll-interval

Mode

Global Config

7.13.2 sntp client mode

This command will enable Simple Network Time Protocol (SNTP) client mode and optionally
setting the mode to either broadcast, multicast, or unicast.

Default

Disabled

Format

sntp client mode [broadcast | multicast | unicast]

Mode

Global Config

7.13.2.1 sntp client mode

This command will disable Simple Network Time Protocol (SNTP) client mode.

Format

no sntp client mode

Mode

Global Config

Summary of Contents for DN-80233




























































































































































































































































































































































































Search results

Summary of Contents for DN-80233

Reviews:

Brands by name

Popular brands

Digitus DN-80233, User Manual

Search results

Summary of Contents for DN-80233

Reviews:

Brands by name

Popular brands