Digitus DN-80233, User Manual

Page: 232 / 379

231
Assign Queue Directs traffic stream to the specified QoS queue. This allows a traffic classifier to
specify which one of the supported hardware queues are used for handling packets belonging to the class.
Class Name The name of this class.
Committed Burst Size (KB) This field displays the committed burst size, used in simple policing,
single-rate policing, and two-rate policing.
Committed Rate (Kbps) This field displays the committed rate, used in simple policing, single-rate
policing, and two-rate policing.
Conform Action The current setting for the action taken on a packet considered to conform to the
policing parameters. This is not displayed if policing is not in use for the class under this policy.
Conform COS
The action to be taken on conforming packets per the policing metrics.
Conform DSCP Value This field shows the DSCP mark value if the conform action is markdscp.
Conform IP Precedence Value This field shows the IP Precedence mark value if the conform
action is markprec.
Conform Secondary COS
The action to be taken on packets conforming with the secondary class of
service value per the policing metrics.
Drop Drop a packet upon arrival. This is useful for emulating access control list operation using DiffServ,
especially when DiffServ and ACL cannot co-exist on the same interface.
Exceed Action The current setting for the action taken on a packet considered to exceed to the policing
parameters. This is not displayed if policing not in use for the class under this policy.
Exceed COS
The action to be taken on excess packets per the policing metrics.
Exceed DSCP Value
This field shows the DSCP mark value if this action is markdscp.
Exceed IP Precedence Value This field shows the IP Precedence mark value if this action is mark-
prec.
Exceed Secondary COS
The action to be taken on excess packets conforming with the
secondary class of service value per the policing metrics.
Excess Burst Size (KB)
This field displays the excess burst size, used in single-rate policing.
Mark CoS Denotes the class of service value that is set in the 802.1p header of outbound packets. This is
not displayed if the mark cos was not specified.
Mark IP DSCP Denotes the mark/re-mark value used as the DSCP for traffic matching this class. This
is not displayed if mark ip description is not specified using the police-two-rate command, or if policing is in
use for the class under this policy.
Mark IP Precedence
Denotes the mark/re-mark value used as the IP Precedence for traffic
matching this class. This is not displayed if precedence is not specified using police-tworate
command, or if either mark DSCP or policing is in use for the class under this policy.
Mark Secondary COS
Denotes the secondary class of service value that is set in the 802.1p
header of outbound packets. This is not displayed if the mark secondary-cos was not specified.
Non-Conform Action The current setting for the action taken on a packet considered to not conform to
the policing parameters. This is not displayed if policing not in use for the class under this policy.
Non-Conform COS
The action to be taken on violating packets per the policing metric.
Non-Conform DSCP Value
This field displays the DSCP mark value if this action is