Digitus DN-80233, User Manual

Page: 48 / 379

47
6.0
Mode-based Command Line Interface
The Command Line Interface (CLI) groups all the commands in appropriate modes according to
the nature of the commands. Sample of the CLI command modes are described below. Each of
the command modes supports specific switch’s commands.
The CLI Command Modes table captures the command modes, the prompts visible in that mode
and the exit method from that mode.
Table 10. CLI Command Modes
Command
Mode
Access Method Prompt
Exit or Access
Previous Mode
User Exec
Mode This is the first
level of access.
Perform basic
tasks and list sys-
tem information. Switch> Enter Logout
command
Privileged
Exec Mode From the User
Exec mode, enter
the
enable
com-
mand.
Switch# To exit to the
User Exec
mode, enter exit
or press Ctrl-Z.
VLAN Mode From the Privi-
leged Exec mode,
enter the
vlan
database
com-
mand.
Switch (Vlan) # To exit to the
Privileged Exec
mode, enter the
exit command,
or press Ctrl-Z
to switch to the
User Exec
mode.
Global
Config Mode From the Privi-
leged Exec mode,
enter the
con-figure
command.
Switch (Config)# To exit to the
Privileged Exec
mode, enter the
exit command,
or press Ctrl-Z
to switch to the
User Exec
mode.
Interface
Config Mode From the Global
Config mode, enter
the
inter-face
<
unit/slot/ port
>
command.
Switch (Interface "if number")# To exit to the
Global Config
mode, enter
exit. To return to
the User Exec
mode, enter
ctrl-Z.
Line Config
Mode From the Global
Config mode, enter
the
lineconfig
command
Switch (line) # To exit to the
Global Config
mode, enter
exit. To return to
the User Exec
mode, enter
ctrl-Z.