Digitus DN-80233, User Manual

Page: 280 / 379

279
Mode Router OSPF Config
11.6.26.1 no external-lsdb-limit
This command configures the default external LSDB limit for OSPF.
Format no external-lsdb-limit
Mode Router OSPF Config
11.6.27 ip ospf areaid
This command sets the OSPF area to which the specified router interface belongs. The value for
<areaid> is an IP address, formatted as a 4-digit dotted-decimal number that uniquely identifies the
area to which the interface connects. Assigning an area id, which does not exist on an interface,
causes the area to be created with default values.
Format ip ospf areaid <areaid>
Mode Interface Config
11.6.28 ip ospf authentication
This command sets the OSPF Authentication Type and Key for the specified interface.
The value of <type> is either none, simple or encrypt. The [key] is composed of standard
displayable, non-control keystrokes from a Standard 101/102-key keyboard. The authentication key
must be 8 bytes or less if the authentication type is simple. If the type is encrypt, the key may be up
to 256 bytes. If the type is encrypt a <keyid> in the range of 0 and 255 must be specified.
Default
The default authentication type is none.
Default
The default password key is not configured. Unauthenticated interfaces do not need an
authentication key.
Default
The default keyid is not configured. Unauthenticated interfaces do not need an
authentication key id.
Format
ip ospf authentication {none | {simple <key>} | {encrypt <key> <keyid>}}
Mode
Interface Config
11.6.28.1 no ip ospf authentication
This command sets the default OSPF Authentication Type for the specified interface.
Format no ip ospf authentication
Mode Interface Config
11.6.29 ip ospf cost
This command configures the cost on an OSPF interface. The <cost> parameter has a range of 1
to 65535.