Digitus DN-80233, User Manual

Page: 322 / 379

321
Default
none
Format network <networknumber> [mask <networkmask> [<vpncos> [<nexthop>
[send | donotsend]]]]
Mode Router BGP Config
12.1.57.1 no network
This command removes NLRI (Network Layer Reachability Information) from the BGP4 Router.
The Network number is a valid IP address entry.
Format no network <networknumber> [mask <networkmask>]
Mode Router BGP Config
12.1.58 redistribute
This command configures BGP protocol to redistribute routes from the specified source protocol/
routers. RFC 1745 requires that the BGP/IDRP identifier must be equal to the OSPF router
identifier at all times that the router is up. But in the current implementation, these two can be
different.
Default
value for metric not-configured
Default
value for match internal
Format redistribute ospf [metric <0-4294967295>] [match [internal] [external 1] [external 2]
[nssa-external 1] [nssa-external-2]]
(for OSPF as source protocol)
Format redistribute {rip | static | connected} [metric <0-4294967295>]
(for other source
protocol)
Mode Router BGP Config
12.1.58.1 no redistribute
This command unconfigures redistribution for BGP protocol from the specified source
protocol/routers.
Format no redistribute {ospf | bgp | static | connected} [metric] [match [internal]
[external 1] [external 2] [nssa-external 1] [nssa-external-2]]
Mode Router BGP Config
12.1.59 route-aggregation
This command enables the usage of path address aggregation.The possible values for this field are
enable
and
disable.
Default
disabled