Digitus DN-80233, User Manual

Page: 265 / 379

264
11.5 Virtual Router Redundancy Protocol (VRRP)
Commands
This chapter provides a detailed explanation of the VRRP commands. The commands are divided
by functionality into the following different groups:
„ Show commands are used to display switch settings, statistics and other information.
„ Configuration Commands are used to configure features and options of the switch. For every
configuration command there is a show command that will display the configuration setting.
„
Copy commands are used to transfer configuration and informational files to and from the
switch.
11.5.1 ip vrrp
This command sets the virtual router ID on an interface for Virtual Router configuration in the router.
This commands also designates the configured virtual router IP address as a secondary IP address
on an interface. The parameter <vrID> is the virtual router ID which has an integer value range
from 1 to 255.
Default
none
Format ip vrrp <vrID> <ipaddress> [secondary]
Mode Interface Config
11.5.1.1 no ip vrrp
This command removes all VRRP configuration details of the virtual router configured on a specific
interface. This command also removes a virtual rourter IP address as a secondary IP address on
an interface. The parameter <vrID> is the virtual router ID which has an integer value ranges from 1
to
255.
Format no ip vrrp <vrID> <ipaddress> [secondary]
Mode Interface Config
11.5.2 ip vrrp
This command enables the administrative mode of VRRP in the router. This command also
designates the configured virtual router IP address as a secondary IP address on an interface.
Default
enabled
Format ip vrrp <vrid> <ipaddress> [secondary]
Mode Global Config
11.5.2.1 no ip vrrp
This command disables the default administrative mode of VRRP in the router.