Digitus DN-80233, User Manual

Page: 296 / 379

295
are preferred when determining the best route.
Default
15
Format distance rip <0-255>
Mode Router RIP Config
11.7.6.1 no distance rip
This command sets the default route preference value of RIP in the router.
Format no distance rip
Mode Router RIP Config
11.7.7 distribute-list out
This command is used to specify the access list to filter routes received from the source protocol.
Default
0
Format distribute-list <1-199> out {ospf | bgp | static | connected}
Mode Router RIP Config
11.7.7.1 no distribute-list out
This command is used to specify the access list to filter routes received from the source protocol.
Format no distribute-list <1-199> out {ospf | bgp | static | connected}
Mode Router RIP Config
11.7.7.2 no default-information originate
This command is used to control the advertisement of default routes.
Format no default-information originate
Mode Router RIP Config
11.7.8 ip rip authentication
This command sets the RIP Version 2 Authentication Type and Key for the specified interface. The
value of <type> is either none, simple, or encrypt.
The value for authentication key [key] must be 16 bytes or less. The [key] is composed of standard
displayable, non-control keystrokes from a Standard 101/102-key keyboard. If the value of <type>
is encrypt, a keyid in the range of 0 and 255 must be specified.
Default
The default authentication type is none.
Default
The default password key is an empty string. Unauthenticated interfaces do not need an
authentication key.