Digitus DN-80233, User Manual

Page: 281 / 379

280
Default
10
Format ip ospf cost <1-5535>
Mode Interface Config
11.6.29.1 no ip ospf cost
This command configures the default cost on an OSPF interface. The <cost> parameter has a
range of 1 to 65535.
Format no ip ospf cost
Mode Interface Config
11.6.30 ip ospf dead-interval
This command sets the OSPF dead interval for the specified interface.
The value for <seconds> is a valid positive integer, which represents the length of time in seconds
that a router's Hello packets have not been seen before its neighbor routers declare that the router
is down. The value for the length of time must be the same for all routers attached to a common
network. This value should be some multiple of the Hello Interval (i.e. 4).
Valid values range for <seconds> is from 1 to 2147483647.
Default
40
Format ip ospf dead-interval <1-2147483647>
Mode Interface Config
11.6.30.1 no ip ospf dead-interval
This command sets the default OSPF dead interval for the specified interface.
Format no ip ospf dead-interval
Mode Interface Config
11.6.31 ip ospf hello-interval
This command sets the OSPF hello interval for the specified interface.
The value for <seconds> is a valid positive integer, which represents the length of time in seconds.
The value for the length of time must be the same for all routers attached to a network.
Valid values range from 1 to 65535.
Default
10
Format ip ospf hello-interval <1-65535>