Digitus DN-80233, User Manual

Page: 364 / 379

363
Neighbor Count
This field displays the number of neighbors on the PIM-SM interface.
13.5.18 show ip pimsm neighbor
This command displays the neighbor information for PIM-SM on the specified interface.
Format show ip pimsm neighbor {<unit/slot/port> | all}
Mode Privileged EXEC and User EXEC
Unit/Slot/Port
Valid unit, slot and port number separated by forward slashes.
IP Address
This field displays the IP Address of the neighbor on an interface.
Up Time
This field indicates the time since this neighbor has become active on this interface
Expiry Time
This field indicates the expiry time of the neighbor on this interface.
13.5.19 show ip pimsm rp
This command displays the PIM information for candidate Rendezvous Points (RPs) for all IP
multicast groups or for the specific <groupaddress> <groupmask> provided in the command. The
information in the table is displayed for each IP multicast group.
Format show ip pimsm rp {<groupaddress> <groupmask> | candidate | all}
Mode Privileged EXEC and User EXEC
Group Address
This field specifies the IP multicast group address.
Group Mask
This field specifies the multicast group address subnet mask.
Address
This field displays the IP address of the Candidate-RP.
Hold Time
This field displays the hold time of a Candidate-RP.
Expiry Time
This field displays the minimum time remaining before the Candidate-RP will be
declared down.
Component
This field displays a number which uniquely identifies the component. Each protocol
instance connected to a separate domain should have a different index value.
13.5.20 show ip pimsm rphash
This command displays the RP router that will be selected from the set of active RP routers. The
RP router, for the group, is selected by using the hash algorithm defined in RFC 2362.
Format show ip pimsm rphash <groupaddress>