manualshive.com logo in svg

Digitus DN-80233, User Manual

Share
Download
Digitus DN-80233 User Manual Download Page 353

 

352

Source Filter Mode 

The source filter mode (Include/Exclude) for the specified group on this 

interface. This is “-----” for IGMPv1 and IGMPv2 Membership Reports.   

 

If detail is specified, the following fields are displayed:   

Interface 

Valid unit, slot and port number separated by forward slashes.

 

 

Group Compatibility Mode 

The group compatibility mode (v1, v2 or v3) for the specified group 

on this interface.   

Source Filter Mode 

The source filter mode (Include/Exclude) for the specified group on this 

interface. This is “-----” for IGMPv1 and IGMPv2 Membership Reports.   

Source Hosts 

This displays the list of unicast source IP Addresses in the group record of the 

IGMPv3 Membership Report with the specified multicast group IP Address. This is 
“-----” for IGMPv1 and IGMPv2 Membership Reports.   

Expiry Time 

This displays the amount of time remaining to remove this entry before it is aged out. 

This is “----” for IGMPv1 and IGMPv2 Membership Reports.   

13.3.19 show ip igmp interface stats   

 

This command displays the IGMP statistical information for the given interface. The statistics are 
only displayed when the interface is enabled for IGMP.   

Format    show ip igmp interface stats <unit/slot/port> 

 

Modes    Privileged EXEC User EXEC

 

Querier Status 

This field indicates the status of the IGMP router, whether it is running in 

Querier mode or Non-Querier mode.   

Querier IP Address 

This field displays the IP Address of the IGMP Querier on the IP subnet to 

which this interface is attached.   

Querier Up Time   

This field indicates the time since the interface Querier was last changed.   

Querier Expiry Time 

This field displays the amount of time remaining before the Other Querier 

Present Timer expires. If the local system is the querier, the value of this object 
is zero.   

Wrong Version Queries 

This field indicates the number of queries received whose IGMP 

version does not match the IGMP version of the interface.   

Number of Joins   

This field displays the number of times a group membership has been 

added on this interface.   

Number of Groups   

This field indicates the current number of membership entries for this 

interface  

   

Summary of Contents for DN-80233




























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands