Digitus DN-80233 Page 351 User Manual Download | Manualshive

Page: 351 / 379

background image

350

13.3.16 show ip igmp groups

This command displays the registered multicast groups on the interface. If “detail” is specified this
command displays the registered multicast groups on the interface in detail.

Format show ip igmp groups <

unit/slot/port

> [detail]

Mode Privileged EXEC

If detail is not specified, the following fields are displayed:

IP Address

This displays the IP address of the interface participating in the multicast

group.

Subnet Mask

This displays the subnet mask of the interface participating in the

multicast group.

Interface Mode

This displays whether IGMP is enabled or disabled on this interface.

The following fields are not displayed if the interface is not enabled:

Querier Status

This displays whether the interface has IGMP in Querier mode or

Non-Querier mode.

Groups

This displays the list of multicast groups that are registered on this interface.

If detail is specified, the following fields are displayed:

Multicast IP Address

This displays the IP Address of the registered multicast group on this

interface.

Last Reporter

This displays the IP Address of the source of the last membership report received

for the specified multicast group address on this interface.

Up Time

This displays the time elapsed since the entry was created for the specified

multicast group address on this interface.

Expiry Time

This displays the amount of time remaining to remove this entry before it is aged

out.

Version1 Host Timer

This displays the time remaining until the local router will assume that there

are no longer any IGMP version 1 multicast members on the IP subnet attached to
this interface. This could be an integer value or “-----” if there is no Version 1 host
present.

Version2 Host Timer

This displays the time remaining until the local router will assume that there

are no longer any IGMP version 2 multicast members on the IP subnet attached
to this interface. This could be an integer value or “-----” if there is no Version 2
host present.

Group Compatibility Mode

The group compatibility mode (v1, v2 or v3) for this group on the

specified interface.

«
...
349
350
351
352
353
...
»

Summary of Contents for DN-80233




























































































































































































































































































































































































Reviews:

No comments

Related manuals for DN-80233

Brand: IBM Pages: 88

Brand: Daxten Pages: 2

Brand: Micrel Pages: 15

Brand: Woxcon Pages: 42

Brand: IPGARD Pages: 2

Brand: Orno Pages: 2

AMX ENOVA DVX-3250HD-SP

Brand: Harman Pages: 119

Brand: N-Tron Pages: 169

Brand: T1V Pages: 2

Brand: socomec Pages: 38

Brand: Ubiquiti Pages: 23

Brand: Exsys Pages: 2

Brand: MLis Pages: 85

Hidden Ignition Switch

Brand: Booma-RC Pages: 16

Brand: Versa Technology Pages: 96

Brand: Omron Pages: 6

Brand: Ortech Pages: 3

Smart MatriX LE

Brand: Analog way Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands