Digitus DN-80233, User Manual

Page: 261 / 379

260
11.3 Router Discovery Protocol Commands
This chapter provides a detailed explanation of the Router Discovery commands. The commands
are divided by functionality into the following different groups:
„ Show commands are used to display switch settings, statistics and other information.
„ Configuration Commands are used to configure features and options of the switch. For every
configuration command there is a show command that will display the configuration setting.
„
Copy commands are used to transfer configuration and informational files to and from the switch.
11.3.1 ip irdp
This command enables Router Discovery on an interface.
Default
disabled
Format
ip irdp
Mode
Interface Config
11.3.1.1 no ip irdp
This command disables Router Discovery on an interface.
Format
no ip irdp
Mode
Interface Config
11.3.2 ip irdp address
This command configures the address to be used to advertise the router for the interface. The valid
values for ipaddr are 224.0.0.1 and 255.255.255.255.
Default 224.0.0.1
Format
ip irdp address <ipaddr>
Mode
Interface Config
11.3.2.1 no ip irdp address
This command configures the default address to be used to advertise the router for the interface.
Format
no ip irdp address
Mode
Interface Config
11.3.3 ip irdp holdtime
This command configures the value, in seconds, of the holdtime field of the router advertisement
sent from this interface. The range is the maxadvertinterval to 9000 seconds.
Default 3 * maxinterval
Format
ip irdp holdtime <maxadvertinterval-9000>
Mode
Interface Config
11.3.3.1 no ip irdp holdtime