manualshive.com logo in svg

Digitus DN-80233, User Manual

Share
Download
Digitus DN-80233 User Manual Download Page 335

 

334

process at a time. The results of this command will be available in the results buffer pool which can 
be displayed by using "show mrinfo".   

Default  

none  

Format  

mrinfo [<ipaddr>] 

 

Mode  

Privileged EXEC 

 

13.1.6 mstat 

 

This command is used to find the IP Multicast packet rate and loss information path from a source 
to a receiver (unicast router id of the host running mstat). The results of this command will be 
available in the results buffer pool which can be displayed by using the command “show mstat” on 
page 255. If a debug command is already in progress, a message is displayed and the new request 
fails.  

The <source> is the IP address of the remote multicast-capable source. The [receiver] is the IP 
address of the receiver. The default value is the IP address of the system at which the command is 
issued. The [group] is a multicast address of the group to be displayed. The default value is 
224.2.0.1(the group used for the multicast backbone).   

Note: 

The group and receiver IP addresses can be entered in any order. 

Default  

none 

Format  mstat <source> [<group/receiver >] [<group/receiver>]

 

Mode  Privileged EXEC 

 

13.1.7 mtrace   

 

This command is used to find the IP Multicast path from a source to a receiver (unicast router ID of 
the host running mtrace). A trace query is passed hop-by-hop along the reverse path from the 
receiver to the source, collecting hop addresses, packet counts, and routing error conditions along 
the path, and then the response is returned to the requestor. The results of this command are 
available in the results buffer pool which can be displayed by using the command “show mtrace” on 
page 255.   

The <source> is the IP address of the remote multicast-capable source. The [receiver] is the IP 
address of the receiver. The default value is the IP address of system at which the command is 
issued. The [group] is the multicast address of the group to be displayed. The default value is 
224.2.0.1(the group used for the multicast backbone). If a debug command is already in execution, 
a message is displayed and the new request fails.   

Note: 

The group and destination IP addresses can be entered in any order.   

Default  

none  

Format

   

mtrace <sourceipaddr> [<group/destination>] [<group/destina-tion >]

   

 

Mode  Privileged EXEC 

 

13.1.8 show ip mcast   

 

This command displays the system-wide multicast information.   

Summary of Contents for DN-80233




























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands