Digitus DN-80233, User Manual

Page: 338 / 379

337
13.1.13 show ip mcast mroute source
This command displays the multicast configuration settings such as flags, timer settings, incoming
and outgoing interfaces, RPF neighboring routers, and expiration times of all the entries in the
multicast mroute table containing the given <
sourceipaddr>
or <
sourceipaddr> [<groupipaddr>]
pair.
Format show ip mcast mroute source <sourceipaddr> {summary | <groupi-paddr>}
Modes Privileged EXEC User EXEC
If the detail parameter is specified the follow fields are displayed:
Source IP Addr
This field displays the IP address of the multicast data source.
Group IP Addr
This field displays the IP address of the destination of the multicast packet.
Expiry Time
This field displays the time of expiry of this entry in seconds.
Up Time
This field displays the time elapsed since the entry was created in seconds.
RPF Neighbor
This field displays the IP address of the RPF neighbor.
Flags
This field displays the flags associated with this entry.
If the summary parameter is specified the follow fields are displayed:
Source IP Addr
This field displays the IP address of the multicast data source.
Group IP Addr
This field displays the IP address of the destination of the multicast packet.
Protocol
This field displays the multicast routing protocol by which this entry was created.
Interface
This field displays the interface on which the packet for this source arrives.
Outgoing Interface List
This field displays the list of outgoing interfaces on which this packet is
forwarded.
13.1.14 show ip mcast mroute static
This command displays all the static routes configured in the static mcast table if is specified or
displays the static route associated with the particular <
sourceipaddr>
.
Format show ip mcast mroute static [<sourceipaddr>]
Modes Privileged EXEC User EXEC
Source Address
This field displays the IP address of the multicast packet source.
Source Mask
This field displays the mask applied to the IP address of the multicast packet source.
RPF Address
This field displays the IP address to be used as RPF for the given source and
mask.
Metric
This field displays the metric value corresponding to the source address.