manualshive.com logo in svg

Digitus DN-80233, User Manual

Share
Download
Digitus DN-80233 User Manual Download Page 167

 

166

Mode  

Global Config 

 

7.22.8 spanning-tree forward-time   

 

This command sets the Bridge Forward Delay parameter to a new value for the common and internal 
spanning tree. The forward-time value is in seconds within a range of 4 to 30, with the value being greater 
than or equal to "(Bridge Max Age / 2) + 1".   

Default  

15 

Format  

spanning-tree forward-time <4-30>

 

Mode  

Global Config 

 

7.22.8.1 no spanning-tree forward-time 

 

This command sets the Bridge Forward Delay parameter for the common and internal spanning tree to the 
default value, i.e. 15.   

Format  

no spanning-tree forward-time 

Mode  

Global Config 

 

7.22.9 spanning-tree hello-time   

 

This command sets the Admin Hello Time parameter to a new value for the common and internal 
spanning tree. The hellotime <value> is in whole seconds within a range of 1 to 10 with the value 
being less than or equal to "(Bridge Max Age / 2) - 1".   

Default

   

2  

Format

   

spanning-tree hello-time <1-10>

 

 

Mode

   

Interface Config   

 

7.22.9.1 no spanning-tree hello-time 

 

This command sets the admin Hello Time parameter for the common and internal spanning tree to 
the default value.   

Format

   

no spanning-tree hello-time

 

 

Mode

   

Interface Config 

 

 

7.22.10 spanning-tree max-age   

 

This command sets the Bridge Max Age parameter to a new value for the common and internal spanning tree. 
The max-age value is in seconds within a range of 6 to 40, with the value being less than or equal to "2 times   
(Bridge Forward Delay - 1)".   

Summary of Contents for DN-80233




























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands